Skip to content
Open calculators

Auto-Scrubber Solution Tank Planner

Estimate solution volume and tank fills for a route from entered area coverage and machine capacity.

Enter Area to scrub (ft2), Area covered per full tank (ft2), Solution tank usable capacity (gal), Label finished-solution yield (gal/gal concentrate) to calculate Estimated full-tank equivalents, Estimated route solution volume (gal), Solution prepared at full-tank capacity (gal), Estimated concentrate (gal).

Professional example: Estimating solution tank refills for a defined route. The example inputs remain editable and must be replaced with current site or product data before operational use.

Inputs

Cleaning product and site inputs

Range: 0–1,000,000,000 ft2

Enter the measured or contract-defined area for this work order in square feet.

Range: 0.001–100,000,000 ft2

Use measured route coverage for this machine, floor, speed, pad, and solution setting; tank capacity alone does not determine coverage.

Range: 0.001–1,000,000 gal

Copy usable solution-tank capacity from the exact machine manual, not only the nominal model family.

Range: 1–1,000,000

Copy the finished-solution yield from the product direction. Do not substitute a generic dilution ratio.

Result

Estimated concentrate (gal)
—
Solution prepared at full-tank capacity (gal)
—
Estimated route solution volume (gal)
—
Estimated full-tank equivalents
—

Formula

Calculation logic

Formula definitions and substituted values.

What to check

  • Example values are editable planning inputs. Confirm current product labels, facility measurements, supplier records, and local procedures before use.
  • Confirm the input units and relationships match the current label, supplier record, payroll record, or facility measurement before relying on the result.

Related calculators

Use measured site data or the exact product/equipment documentation. The result is a planning estimate and does not set a legal, safety, hygiene, or staffing standard.